Analysis of Dialysate pH and Temperature Stability on Hemodialysis Machines Using Internet of Thing Technology

Noviyanto Putera P; Lusiana Lusiana; Endang Dian Setioningsih; Sari Luthfiyah; Abhilash Pati

doi:10.35882/ijeeemi.v5i1.267

Analysis of Dialysate pH and Temperature Stability on Hemodialysis Machines Using Internet of Thing Technology

Noviyanto Putera P Department of Medical Electronics Technology, Poltekkes Kemenkes Surabaya, Indonesia
Lusiana Lusiana Departement of Medical Electronics Technology, Poltekkes Kemenkes Surabaya, Indonesia https://orcid.org/0000-0001-6228-8407
Endang Dian Setioningsih Department of Medical Electronics Technology, Poltekkes Kemenkes Surabaya, Indonesia https://orcid.org/0000-0003-2792-5735
Sari Luthfiyah Department of Medical Electronics Technology, Poltekkes Kemenkes Surabaya, Indonesia https://orcid.org/0000-0001-9677-7209
Abhilash Pati Siksha 'O' Anusandhan Deemed to be University, Bhubaneswar, India https://orcid.org/0000-0002-3418-4202

DOI: https://doi.org/10.35882/ijeeemi.v5i1.267

Keywords: Chronic Kidney Disease, Hemodialysis, pH dialysate, Dialysate temperature, pH sensor, Temperature sensor

Abstract

Therapy for kidney replacement with hemodialysis is a treatment that is carried out in patients with Chronic Kidney Failure to survive. The purpose of this study was to determine the stability of the dialysate fluid in the hemodialysis machine by measuring the temperature using the DS18B20 sensor and measuring the dialysate pH using the 4502C sensor on pre and post-hemodialysis. The research method and the manufacture of this module use a pre-experimental research design with the type of research "one group posttest design" the independent variables are the pH value and Dialysate Temperature, the dependent variable is the pH and Temperature Sensor, the control variable is the Traceable Tool. This research made a module using an Esp32 microcontroller system with an LCD that can be monitored with Android via the Internet of Things (IoT) system. 03 and the comparison of the results of the dialysate temperature values at the time of pre and post-obtained the maximum measurement error of 0.2%. From the measurement and analysis data, it can be concluded that there is no effect of pH and temperature values during pre and post hemodialysis.

Downloads

Download data is not yet available.

Published

2023-02-24

How to Cite

[1]

N. Putera P, L. Lusiana, E. D. Setioningsih, S. Luthfiyah, and A. Pati, “Analysis of Dialysate pH and Temperature Stability on Hemodialysis Machines Using Internet of Thing Technology”, Indones.J.electronic.electromed.med.inf, vol. 5, no. 1, Feb. 2023.

Download Citation

Issue

Vol. 5 No. 1 (2023): February

Section

Research Article

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).