Measuring Respiration Rate Via Android

  • Shofiyah Shofiyah Departemen of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • I Dewa Gede Hari Wisana Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • Triwiyanto Triwiyanto Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
  • Sari Luthfiyah Department of Electromedical Engineering, Poltekkes Kemenkes Surabaya
DOI: https://doi.org/10.35882/ijeeemi.v1i1.4
Keywords: Keywords - Respiration rate; Android; Arduino microcontroller; Bluetooth

Abstract

Abstract-Respiratory rate is the total number of breath or breathing cycle, which occurs every minute. Abnormal respiratory rate is a sensitive indicator for danger patients requiring medical treatment immediately. The objective of the study is to design respiration rate monitor via Anroid mobile phone. In this study, we used flex sensors to detect the respiration rate. The flex sensors was placed in the human stomach diaphragm which detects the changes in the human stomach diaphragm during breathing. The measurement results are displayed on the liquid crystal display (LCD) 2 x 16. The data  will be sent via a Bluetooth connection to the android to display the values ​​and graphs. The comparison between the design and standart showed that the maximum erros is 4.69% while the minimum error is 1.52%. The average error for all measurement is 2.83%. It can be concluded that the tool wear is eligible because it is still below the minimum threshold of 10% error.

Downloads

Download data is not yet available.
Published
2019-08-22
How to Cite
[1]
S. Shofiyah, I. D. G. Hari Wisana, T. Triwiyanto, and S. Luthfiyah, “Measuring Respiration Rate Via Android”, Indones.J.electronic.electromed.med.inf, vol. 1, no. 1, Aug. 2019.
Issue
Vol. 1 No. 1 (2019): August
Section
Research Article

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0)  that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).