Incubator Analyzer Using Bluetooth Android Display (Humidity & Air Flow)

  • Vina Nadhirotul Azkiyak Department of Electromedical Engineering PoltekkesKemenkes, Surabaya
  • Syaifudin Syaifudin Department of Electromedical Engineering PoltekkesKemenkes, Surabaya
  • Dyah Titisari Department of Electromedical Engineering PoltekkesKemenkes, Surabaya
DOI: https://doi.org/10.35882/ijeeemi.v1i2.5
Keywords: Keywords—Incubator Analyzer; Kelembaban; Air Flow; Android

Abstract

Abstract— Incubator Analyzer is a calibrator used to calibrate incubator temperature, mattress temperature, noise, humidity and airflow so that conditions in the baby incubator environment remain stable and within normal limits. The purpose of this study is to develop a system for sending data to android and data storage. "Incubator Analyzer Using Bluetooth Appear Android" has four parameters for measuring temperature, noise, humidity, and water flow. Using the Atmega328 microcontroller as a data processor, and the output results will be displayed on the LCD display and equipped with data transmission via bluetooth HC-05 displayed to Android with data storage. The moisture parameter detects humidity quite well where the biggest error is obtained at 1.28% DHT-22, the Ultrasound Sensor HC SR-04 can detect Air Flow with an error of 311.66% as measured by a comparison device. Incubator Design This analyzer is made portable to calibrate baby incubator tools.

Downloads

Download data is not yet available.
Published
2019-11-28
How to Cite
[1]
V. N. Azkiyak, S. Syaifudin, and D. Titisari, “Incubator Analyzer Using Bluetooth Android Display (Humidity & Air Flow)”, Indones.J.electronic.electromed.med.inf, vol. 1, no. 2, pp. 71-77, Nov. 2019.
Issue
Vol. 1 No. 2 (2019): November
Section
Research Article

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0)  that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).