Design Dryblock In Digital Thermometer Calibrator Based on Arduino
Abstrak- Dryblock is a versatile temperature calibrator that works with heating. Most of the dry block using one or more inserts that can be exchanged where the holes are drilled. These holes accommodate various temperature sensors to be calibrated. diameter hole size in accordance with the temperature sensor into tested.The device is very simple way, namely by inserting a thermometer to be calibrated into a hole that has been provided on the tool and will be compared with LM35 temperature readings that already appears on the LCD screen so that it will look at the difference between the thermometer display.This temperature reading and temperature modules have been compared with a calibrated thermometer in BPFK Surabaya, and the biggest mistake in getting the smallest is 0, 2% and 0.1%
Copyright (c) 2020 Ardelina Ramadhani, Endang Dian Setioningsih, syaifuddin syaifuddin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlikel 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).